The UV flame detector KLC 11 EX is designed for industrial use in ATEX Zone 1 areas that do not require a continuous operation approved flame detector and whose control only requires an open collector output.
The KLC 11 EX is a compact flame detector specially designed for single burner firing systems that produce almost no radiation in the visible light spectrum or operate with very low flame modulation. The UV tube used ensures that background radiation, e.g. from glowing brick linings or mixing equipment parts, is not detected.
The flame signal intensity can be easily recognised via an LED as a visual indicator. The KLC 11 EX can be connected directly to the ionisation or LDR input of the automatic burner control system. It is compatible in its dimensions, connection dimensions and pin assignment with other devices from the KLC series. All accessories are therefore identical and reduce the variety of parts in production and service.
The flame detector KLC 11 EX is designed in accordance with EN298:2012-11 for automatic burner control systems which check whether a flame signal is still present after the control shutdown, although the flame amplifier is permanently energised. The flame monitor must be disconnected from the mains at least once in 24 hours and restarted.
Do you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_700x384px_rmf.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo_neu.svg
pixel-admin2021-05-20 16:11:122023-07-26 09:20:56Relay module RMFDo you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.
