The KHM 20 is a compact broadband flame detector which has been specially developed for rough industrial use in single burner systems and in particular in connection with programmable logic controllers (e.g. PLC).
The KHM 20 is a compact broadband flame detector which has been specially developed for rough industrial use in single burner systems and in particular in connection with programmable logic controllers (e.g. PLC). The patented evaluation of the flame signal via the flicker frequency of the radiation of the coming flame. All types of flames are detected by the automatic sensitivity evaluation. No adjustments are required for commissioning or maintenance.
The KHM 20 only evaluated the flickering of the flame to be monitored, direct light radiation and constant frequencies do not lead to flame detection. Uniform light beams and any constant frequencies do not lead to a permanent flame detection. Disturbing sources of extraneous light, e.g. from fluorescent tubes or low-frequency background radiation from glowing brickwork, are suppressed. Unintentional influences on the flame detection can thus be avoided.
The adapter, which serves as the interface of the flame detector to the combustion chamber, can be adapted to specific requirements with optionally available lenses, filters and pinholes. An LED as an optical interface is a readout of relevant operating parameters, such as the occurrence of flame modulation, the current switching status, depending on the flame signal or the possible serial number.
Do you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_TG10_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo.svg
pixel-admin2021-05-20 16:23:432021-08-26 15:30:11Flame simulator TG 10
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_IFX-Kabel_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo.svg
pixel-admin2021-05-20 16:24:342021-08-23 12:13:25IFX cable
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_anschlussadapter_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo.svg
pixel-admin2021-05-20 16:25:512021-07-27 10:06:08Connection adapter 1/2″
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_spuelluftflansch_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo.svg
pixel-admin2021-05-20 16:26:292021-07-27 11:44:41Connection adapter 1″ with purge air connection
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_klc-com_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo.svg
pixel-admin2021-05-20 16:29:542021-06-30 11:08:23Readout unit KLC-COMDo you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.
