Robust UV flame detector for rough industrial use in intermittent operation. The IFx series is characterised by its robust die-cast aluminium housing with IP65 protection. The housing concept allows a quick exchange of the device on site.
The IFC 10 is a compact UV flame detector specially designed for use in industrial firing systems. The flame detector can be connected directly to a tuned ionisation or LDR input of the automatic burner control. In accordance with EN 298:2012-11, the IFC 10 flame detector is intended for automatic burner control systems that check whether a flame signal is still present after a control shutdown.
The UV tube used ensures that background radiation, e.g. from glowing brick linings or mixing equipment parts, is not detected. By means of the diopter, which also serves as the flame detector's interface to the combustion chamber, the IFC 10 can be adapted to special requirements with various accessories.
The flame intensity can be easily recognised via an LED as a visual indicator. A simple diagnosis of the flame intensity is thus possible directly at the firing device.
Do you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_700x384px_rmf.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo_neu.svg
pixel-admin2021-05-20 16:11:122023-07-26 09:20:56Relay module RMF
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_IFX-Kabel_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo_neu.svg
pixel-admin2021-05-20 16:24:342021-08-23 12:13:25IFX cable
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_anschlussadapter_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo_neu.svg
pixel-admin2021-05-20 16:25:512021-07-27 10:06:08Connection adapter 1/2″
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_spuelluftflansch_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo_neu.svg
pixel-admin2021-05-20 16:26:292021-07-27 11:44:41Connection adapter 1″ with purge air connection
https://flamonitec-bst.com/wp-content/uploads/bst_solutions_produktbild_UVT-COM_preview.jpg
384
700
pixel-admin
https://flamonitec-bst.com/wp-content/uploads/bfi_logo_neu.svg
pixel-admin2021-05-20 16:28:432023-10-17 12:29:08UVT-COM readout unitDo you have a question about our service portfolio, need planning support for a project or are you looking for a specialist in flame monitoring? Then please contact us.
